Mortar M-2,5 dry

USES AND APPLICATIONS

Brick factories

Pavement filling.

Laying of tiles.

And all kinds of masonry work that does not require high resistance.

PREPARATION

The mortar type M-2.5 packed in bags is prepared in a concrete mixer. Add 3.2 liters of water for each bag of mortar (0.125 liters / kg). Depending on the application, it can be up to 3.5 liters (0.14 liters / kg of mortar)

The support must be clean and damp. Do not apply to paint, plaster or breakable surfaces.

Spread the paste on the support or piece with the help of a trowel or trowel depending on the application.

A soft consistency between 170 and 180 mm of runoff is recommended.

The mortar use time in optimal conditions is 90 minutes, depending on the weather.

It is recommended not to use them when it is expected that the temperatures in the setting process could exceed 40 °C or the temperature could drop below 4 °C.

STORAGE

Covered and dry rooms, avoid humidity environmental areas.

Properly stored material can be used for up to one year from the date of manufacture.

SAFETY

This product contains cement.

Avoid contact with eyes and skin, as well as inhalation of dust.

Wear protective gloves and goggles.

Keep out of the reach of children.

RESISTANCES

Compressive strength following the indications of the test standard UNE EN 1015-11 at 28 days is 2.5 N / mm2

Note: The recommended water for a 175 mm runoff according to UNE EN 1.015-3, is 0.125 liters per Kg of mortar

FEATURES

Cement: Type I / 42.5 R

Sands: 0/2 mm, limestone from crushing.

Sand: 0/1 mm, limestone from crushing.

Additives: Inorganic.

QUALITY

The mortar type M-2,5 is manufactured according to the UNE EN 998-2: 2016 standard (mortars for Masonry), complying with all the parameters indicated in annex Z1 of said standard.

The test standards used to control manufactured mortars are the following:

UNE EN 1015 -1 "Granulometric Composition"

UNE EN 1015 -2 "Collection of mortar samples"

UNE EN 1015 -3 "Value of runoff by shaking table"

UNE EN 1015-11 "Compression resistance value of mortars"

The data provided is based on tests carried out in our control laboratory and contrasted with laboratories accredited by the Generalitat de Catalunya.